Filter
Top Products
.
$
$ -'
One of the following messages displays via Print Manager in the printer status window
when the QMS Network Print Monitor is the originator of the status information:
This printer-dependent status information displays via Print Manager in the printer sta-
tus window when the QMS Network Print Monitor is displaying a message from the
printer. See “Status and Service Messages” on page 8-2 for a complete list and
description of these messages.
This message... indicates... Do this...
Printer not
responding
The QMS Network Print Monitor can’t
communicate with the printer. Either the printer
is off, or the connection is broken.
»Note:
If the job is in process, then it is
terminated, removed from the queue,
reported to the Network Spooler and, if
you’re using Windows NT, listed in the
Application Event Log (if enabled).
If the print job is
spooled by a local
workstation, then
either turn on the
printer or reconnect it
to the network, and
then click the Retry or
Cancel button.
If the job is spooled
by a remote
workstation, then turn
on the printer or
reconnect it to the
network.
Printer Busy
This message displays while the job is
transferred to the printer.
»Note:
Windows NT only—The flag next to
this message indicates spooling status:
Green Flag—Printer spooling is enabled.
Red Flag—Printer spooling is disabled.
None