Filter
Top Products
113
COMMAND QUICK REFERENCE GUIDE
Scan Mode
Keystrokes Function
SCAN Activates Scan Mode, resumes scan when
stopped on a channel or talkgroup.
MAN If scanning or monitoring a trunked call, stops
scan operation, activates Manual Mode.
If monitoring conventional call, stops scan
operation, activates Manual Mode, holds on
active channel.
PGM If scanning or monitoring a trunked call, stops
scan operation, activates Program Mode.
If monitoring conventional call, stops scan
operation, activates Program Mode, holds on
active channel.
WX Activates Weather Mode
TRUNK If monitoring a trunking talkgroup, stores the
ID into the next available ID list memory
location.
TRUNK (hold) If monitoring a trunking talkgroup, activates ID
Hold Mode, scanner holds on the active
talkgroup.
PRI Toggles priority.
TUNE Enters Tune Mode.
ATT Toggles attenuation for active channel, or, if
global attenuation is set, toggles global
attenuationonoroff.
TEXT If monitoring a trunking talkgroup, toggles
talkgroup alphanumeric text tag or trunking ID
display.
L/OUT If monitoring a trunking talkgroup, locks out
the active talkgroup so it will not be monitored.
If monitoring a conventional channel, locks out
the active channel so it will not be monitored.
MODE If monitoring a conventional channel, cycles
through the valid modes, clears any stored CT
or DC code.
SRCH Activates Search Mode.
NUMBER
KEYS 0-9
Toggle scan banks on or off.
DECIMAL
POINT
When monitoring a conventional channel,
toggles delay for that channel on or off.