Filter
Top Products
59
3. Press
ENTER to set the lower
limit frequency. The cursor
moves to upper frequency
field. If the entered frequency
is incorrect,
Invalid Freq briefly
appears in the scanner’s
display.
4. Enter your desired upper
frequency and press
ENTER.
5. Rotate
SQUELCH clockwise
and leave it set to a point just
after the rushing sound stops.
6. Press
SRCH to start
searching. When the scanner
finds an active frequency, it
stops searching.
USING ZEROMATIC
You can set Zeromatic on or off by
pressing
FUNC then 0.PressFUNC
,and then 0 again to toggle the
Zeromatic setting. When this
feature is turned on,
Zeromatic ON
briefly appears in the display, then
z appears at the first digit of the
second line. When searching with
Zeromatic on, the scanner will
automatically tune to the correct
center frequency (or the step
increment closest to the correct
center frequency). When
searching with Zeromatic off, the
scanner will unmute faster on a
detected signal but the frequency
may not be exact. If the scanner
stops on a signal before it reaches
the correct center frequency, you
canstepupordowntothecorrect
frequency using the S or T keys.
Zeromatic functions only in search
banks 2, 3, 4, 5 and 6.