Filter
Top Products
53
SR6________Limit search (User
configurable)
Follow these steps to select
preprogrammed search bands and
search them for active
frequencies:
1. Repeatedly press
SRCH to
select your desired search
bank (SR0, SR1, SR2, SR3,
SR4, SR5, or SR6).
2. In the marine and CB bands,
you can directly select a
channel or search through the
band. When
M appears at the
left most position of the
second line, you can directly
select a channel (refer to
“Search Band Charts” on
Page 54). Use the numeric
keypad to select a specific
two digit channel number (for
example, press
16to select Channel 16, or
05to select channel 5). You
can also change the channels
by pressing S or T.
There are several group
banks in SR2 Police/Fire and
SR4 ham bands. You can turn
on the groups by pressing the
group numbers. For example,
to turn off group 0, press
0.
3. Press
FUNC, and then SRCH
while M is displayed. M
changes to S and now you
can search through the band.
Press
FUNC, and then SRCH
again to return to the previous
mode.
4. Rotate
SQUELCH clockwise
and leave it set to a point just