Filter
Top Products
63
COPYING A FREQUENCY
INTO A VACANT
C
HANNEL IN A SPECIFIED
B
ANK
You can copy a frequency into a
vacant channel in a specified bank
when the scanner stops on the
frequency during search or tune
mode.
Ô
1. Press FUNC, and then ENTER
when you find a frequency
you want to copy.
Bank9 Store?
appears in the scanner’s
display.
2. If you want to copy the
frequency into bank 9, press
ENTER.Itisstoredinthefirst
available vacant channel in
the bank. Or, press your
desired bank number to store,
then press
ENTER to store the
frequency in the selected
bank.
Chan Store! appears for 2
seconds. All the conditions
such as receiving mode and
delay condition are copied on
the channel. After about 2
seconds, the scanner
automatically returns to
search mode.
COPING A FREQUENCY
INTO THE PRIORITY
C
HANNEL
You can copy a frequency into the
priority channel (see
“Programming the Priority
Channel” on Page 40) when the
scanner stops on the frequency
during Search, Scan, Manual,
Tune, or WX mode.
Ô NOTE Ô
If you try to copy a
frequency that is already
stored in the same
baqnk, the scanner
sounds the notice tone 3
times after you press
ENTER.
Dupl.f Chxxx
appears at the bottom
line. If you want to copy
theduplicatefrequency
anyway, press ENTER,
or if not, press CLR to
cancel.