Filter
Top Products
114
Manual Mode
ENTER When monitoring a conventional channel that
is programmed for CT or DC Search Mode,
stores a detected CT or DC code with the
channel memory.
S or T Changes scan direction, up or down.
FUNC + MAN Toggles digital AGC
FUNC +
TRUNK
When monitoring a talkgroup call, toggles
display of control channel text tag or Trunked
ID sub-bank status.
FUNC + PRI If monitoring a conventional channel, stores
the frequency into the priority channel.
FUNC +
TUNE
If monitoring a conventional channel, stores
the frequency into the tune memory.
FUNC + ATT Toggles attenuator mode, normal or global.
FUNC + 5 Toggles open or closed mode for current bank.
FUNC + 0-4 When Trunked ID sub-bank display is active,
and while monitoring a talkgroup call, toggles
ID sub banks 0-4 on or off.
Keystrokes Function
SCAN Activates Scan Mode.
MAN Increments to the next channel memory.
PGM Activates Program Mode.
WX Activates Weather Mode .
PRI Toggles priority.
TUNE Enters Tune Mode.
ATT
Toggles attenuation for selected channel,
or, if global attenuation is set, toggles
global attenuation on or off.
L/OUT Toggles lockout on the selected channel.
MODE
Cycles through valid modes for the
selected channel, clears any stored CT or
DC settings.
SRCH Activates Search Mode.
2, 3, MAN Jumps to channel 23 in the current bank.
1, 2, 3, MAN Jumps to bank 1, channel 23.
DECIMAL
POINT
Toggles delay on selected channel on or
off.
Keystrokes Function