Filter
Top Products
Chapter 9: Security Management
195
2. Apply Encryption Mode to KVM and Virtual Media. When selected,
this option applies the selected encryption mode to both KVM and
virtual media. After authentication, KVM and virtual media data is
also transferred with 128-bit encryption.
3. For government and other high security environments, enable FIPS
140-2 Mode by selecting the Enable FIPS 140-2 checkbox. See
Enabling FIPS 140-2 (on page 196) for information on enabling
FIPS 140-2.
4. PC Share Mode. Determines global concurrent remote KVM access,
enabling up to eight remote users to simultaneously log into one KSX
II and concurrently view and control the same target server through
the device. Click the drop-down list to select one of the following
options:
Private - No PC share. This is the default mode. Each target
server can be accessed exclusively by only one user at a time.
PC-Share - KVM target servers can be accessed by up to eight
users (administrator or non-administrator) at one time. Each
remote user has equal keyboard and mouse control, however,
note that uneven control will occur if one user does not stop
typing or moving the mouse.
5. If needed, select VM Share Mode. This option is enabled only when
PC-Share mode is enabled. When selected, this option permits the
sharing of virtual media among multiple users, that is, several users
can access the same virtual media session. The default is disabled.
6. If needed, select Local Device Reset Mode. This option specifies
which actions are taken when the hardware Reset button (at the
back of the device) is depressed. For more information, see
Resetting the KSX II Using the Reset Button. Choose one of the
following options:
Local device reset
mode
Description
Enable Local Factory
Reset (default)
Returns the KSX II device to the factory
defaults.
Enable Local Admin
Password Reset
Resets the local administrator password only.
The password is reset to raritan.
Disable All Local
Resets
No reset action is taken.
Note: When using the P2CIM-AUSBDUAL or P2CIM-APS2DUAL to
attach a target to two KSX IIs, if Private access to the targets is required,
both KVM switches must have Private set as their PC Share Mode.
See Supported Paragon CIMS and Configurations (on page 275) for
additional information on using Paragon CIMs with the KSX II.