Filter
Top Products
Chapter 2: Installation and Configuration
35
Configure the SSH TCP port as "7888". Once this is done,
connection to the target can be done by using “ssh –l <login>
<KSX II device IP address> -p 7888”.
3. Click OK to save this information.
Once you have created the direct port access, it can be connected in a
client application such as PuTTY. Following is an example of how the
direct port access information would appear in PuTTY. Note that PuTTY
is not the only client application that can be used. It is used here for
sample purposes only.