Filter
Top Products
Chapter 10: Maintenance
212
3. Click the Upgrade button. You are prompted to confirm the upgrade.
4. Click OK to continue the upgrade. Progress bars are displayed
during the upgrade. Upgrading takes approximately 2 minutes or less
per CIM.
Upgrading Firmware
Use the Firmware Upgrade page to upgrade the firmware for your KSX II
and all attached CIMs. This page is available in the KSX II Remote
Console only.
Important: Do not turn off your KSX II or disconnect CIMs while the
upgrade is in progress - doing so will likely result in damage to the
device or CIMs.
To upgrade your KSX II:
1. Locate the appropriate Raritan firmware distribution file (*.RFP),
found on the Raritan Firmware Upgrades webpage:
http://www.raritan.com/support/firmwareupgrades and download the
file.
2. Unzip the file. Read all instructions included in the firmware ZIP files
carefully before upgrading.
3. Copy the firmware update file to a local PC before uploading. Do not
load the file from a network drive.
4. Choose Maintenance > Firmware Upgrade. The Firmware Upgrade
page opens.
5. Click the Browse button to navigate to the directory where you
unzipped the upgrade file.
6. Select the "Review CIM Version Information?" checkbox if you would
like information displayed about the versions of the CIMs in use.