Filter
Top Products
Switching Memory Lock On/Off
Before you can use Memory Lock, you have to switch it on using Function 81.
After you switch Memory Lock on, (MEMORY LOCK) will appear on the display
when the machine is in standby mode.
Note: If you switch Memory Lock on, Forwarding will be automatically disabled.
1. Function 6 0 2 2 2 2 8 1
2. Scroll through the features with ↑ and ↓ until MEMORY LOCK appears.
3. Change the on/off setting by pressing ← or → .
4. Finish: Yes Function
If you wish, you can prevent unidentified senders from sending you messages while Memory
Lock is on. See page 131.
Printing from Memory Lock (Memory Card or Hard Disk Required)
If the Confidential File indicator is blinking, a message has been stored using
Memory Lock. Print it using the following procedure.
1. Function 5 6
2. Input the Memory Lock ID.
Example: 4 6 3 3
3. Start
NOTE: If the Confidential File indicator is blinking, a message has been
stored using Memory Lock. However, if the Confidential File indicator
is lit, a message has been stored using Confidential Reception, and
the indicator no longer clearly shows the presence of files stored using
Memory Lock.
PSTN LINE TYPE SELECT
DP TT
YES
TO END
PRT MEM. LOCK ID SETTING
MEMORY LOCK ID:
NO
TO CANCEL
_
PRT MEM. LOCK PRESS
START
MEMORY LOCK ID: ....
RECEPTION ADVANCED FEATURES
130