Filter
Top Products
Center Mark
If you switch this feature on, a mark is printed halfway down each received page
on the left hand side. This makes it easy for you to position the hole puncher
correctly when you file away the received fax messages.
The center mark is not printed when you use the machine for making copies.
To switch this feature on, do the following. (See page 10 if you need more
information about the User Parameter settings adjustment procedure).
1. Function 6 0 2 2 2 2 9 1
2. The settings for switch 00 are now
shown on the bottom line of the display.
3. Press ↓ until the settings for switch 01
are shown.
The setting that you need to change is
digit 1.
4. If you wish to change the setting, press 1 .
5. Finish: Yes Function
USER PARAMETER PRINT LIST
DEFAULT: 01000000
SWITCH00: 01000000
YES
TO END
Digit 1
0: The center mark will not be printed
1: The center mark will be printed
ADVANCED
FEATURES
ADVANCED FEATURES RECEPTION
147