Filter
Top Products
3. Yes
Erasing the Group
This procedure deletes this Group and all the numbers stored in it. The Speed
Dial Codes and Quick Dial Keys that you used in this Group will not be deleted
from the memory; you can continue to use them for other purposes.
First, enter Group Programming mode as explained on page 38. Then:
1. Press 5 .
2. Either:
❐ To delete the group: Yes
❐ To keep the group: No
GROUP DIAL SELECT
G 01 08 DEST. 0
YES
TO END
1. ADDRESS 2. CHECK 3. LABEL
_
Now, you can either:
❐ Use another module (press a key from 1 to 5).
❐ Start working on another Group (press Yes then go to step 2 of the
procedure on page 38).
❐ Return to standby mode by pressing Function .
GROUP DIAL
G 01 08 WILL BE ALL CLEARED
CLEAR?
YES
.
NO
GROUP DIAL SELECT
G 01 08 DEST. 0
YES
TO END
1. ADDRESS 2. CHECK 3. LABEL
_
Now, you can either:
❐ Use another module (press a key from 1 to 5).
❐ Start working on another Group (press Yes then go to step 2 of the
procedure on page 38).
❐ Return to standby mode by pressing Function .
BEFORE YOU SEND YOUR FIRST FAX
42