Filter
Top Products
Preparing the Machine for Networking Operations
Before you can start to set up fax communication networks, there are some items
that you have to program in your machine. These are as follows.
❐ Your Country Code
❐ Your Fax Machine’s Own Telephone Number
❐ Your Area Code Prefix (normally not necessary in the USA)
❐ The ID Code (the ID Code of your machine and all the Relaying Terminals and
Transfer Stations must be the same)
If you install the optional Group 4 ISDN kit, there are some other items that you
will have to program. These are dealt with in Appendix C, which covers the ISDN
kit.
You will also have to plan how you program your Groups (in co-ordination with
other people at other locations who will use your machine as a Transfer Station),
and you must also know how all the Relaying Terminals and Transfer Stations
have programmed their Groups.
Storing the Country Code
The Country Code is the code that callers in other countries have to input when
dialing a number inside your own country. For the USA, this code is ’1’.
1. Function 6 0 2 2 2 2 6 1
2. Yes
3. Input only your country code. Do not in -
put your international dial access code.
Example: USA - 1
4. Yes Function
COUNTRY CODE
YES
TO SET PREVIOUS
NO
TO CANCEL NEXT
COUNTRY CODE
ID SETTING
YES
TO END
_
COUNTRY CODE
YES
OR
CLR
.
NO
1
_
ADVANCED
FEATURES
ADVANCED FEATURES NETWORKING
83