Filter
Top Products
The following pages explain the symbols that appear in certain columns of the
reports.
The Mode Column
See the bottom of the TCR for a full listing of the symbols that are used on the
TCR. On other reports such as the File List, a code is given, informing the type of
communication. These codes are explained below.
SAF_TX Memory Transmission SUB_RX Substitute Reception
IMM_TX Immediate Transmission FWD_TX Forwarding
CNF_TX Confidential Transmission IMM_RX Normal Reception
TONER Transmission of Toner Order
Form
LCK_RX Reception with Memory Lock
POL_TX Polling Transmission TRN_TX Transfer Request
POL_RX Polling Reception TRN_RX Reception of document from
Transfer Requester prior to
broadcasting
CNF_RX Confidential Reception RPT_RX Reception of Transfer Result
Report
AUTO_D Auto Document
Also, in the Address and Group Name column of the File List, for a Transfer
Request operation, you may see the following codes.
TRN_ST Indicates that the number to the right is a transfer broadcasting station.
REC_ST Indicates that the number to the right is an end receiver in the transfer
broadcasting operation.
TRN_1 Indicates that the number to the right is the first transfer station in a two-step
transfer operation.
TRN_2 Indicates that the number to the right is the second transfer station in a two-step
transfer operation.
TRN_RQ Indicates that the number on the right is the station that requested the transfer
request for this file, using your machine as a transfer broadcasting terminal.
The Results Column
OK: Successful Communication
E: An error occurred
Standby: Ready to transmit
The Footnote on the TCR
TX counter: Total number of transmitted pages
RX counter: Total number of received pages
Counters listed on the User Parameter List
OPU counter:Total number of pages printed so far with the current
master unit.
SCN: Total number of pages scanned
PRN: Total number of pages printed
AUTOMATICALLY PRINTED REPORTS REPORTS
190