Filter
Top Products
3. Yes when you have finished.
Economy Transmission
This feature is similar to Send Later. However, it has the added bonus of
automatically combining two cost-saving features: use of off-peak rates, and
Batch Transmission. Also, you do not have to input the required transmission time
every time, like you do with Send Later. However, with Send Later, you can input
a different time of transmission for each fax message.
If you select Economy Transmission, your fax message will be sent at the time
that you previously stored for this feature using Function 74 (see the next page).
Also, all messages that were stored for sending to the same destination using this
feature will be batched automatically.
Cross-reference
Send Later: see page 60. Batch Transmission: see page 124.
On/Off Selection Switch
1. Either:
❐ Press
↓ 0 7
❐
2. Press
↓ until "ECONOMY TRANS. ON OFF" is displayed.
If you wish to change the
ECONOMY TRANS. setting, press ← or → until
the displayed setting is correct.
3.
Yes when you have finished.
OPTION SELECT
YES
TO END
AUTO REDUCE ON OFF
TTI
If you have previously
programmed this feature as a
User Function Key, press that
key.
SENDING A FAX MESSAGE ROUTINE OPERATION
66