Filter
Top Products
3. Change the setting by using ←
or → .
4. Either:
❐ Change another setting: Go to step 2.
❐ Finish: Yes Function
A table showing the order of appearance of the switches is given below. Some of
these switches may not be seen depending on the options that you have installed
with the machine (1:Optional Memory or hard disk required, 2: Optional paper
feed unit required, 3: Optional printer interface kit required).
*:This only appears if you have asked a service technician to switch RDS on.
Feature
↓
Feature
↓
Telephone Line Type None Halftone Type 8 times
Authorized Reception Once Daylight Saving Time/Summer Time 9 times
Memory Lock
1
Twice File Retention Time 10 times
Forwarding
1
3 times Cassette used for Printer Mode
3
11 times
Specified Cassette Selection
2
4 times
Power Saver 5 times
RDS * 6 times
Confidential File Report
1
7 times
User Parameter Settings
A wide range of features can be switched on or off by using the User Parameters.
However, this feature is more difficult to use than the On/Off Switches. The
switches and adjustments are presented on the screen as rows of digits. Each
digit can be either 0 or 1. Each feature is allocated one or more digit. The value of
the digit determines the status of the feature.
The overall procedure is explained below. However, each of the adjustments that
can be made using this procedure are explained in the relevant parts of the
manual.
1. Function 6 0 2 2 2 2
9 1
❐ At this time, you can print a User
Parameter List if you press → Start .
AUTHORIZ.RX SELECT
ON OFF
YES
TO END
USER PARAMETER PRINT LIST
DEFAULT: 01000000
SWITCH00: 01000000
YES
TO END
HOW TO USE THIS MANUAL
10