Filter
Top Products
Storing the Economy Transmission Time
Before using Economy Transmission, you must use Function 74 to program a
time for Economy Transmissions to start. This should be the start of the off-peak
rate period for your area. After you have stored this, you will not need to change it
again until your telephone company changes the starting time of the off-peak rate
period.
1.
Function 6 0 2 2 2 2 7 4
2. Input the time that you always wish Economy Transmissions to start.
❐ To change from AM to PM and vice versa, press
*
or # .
3. Press
Yes Function when the display is correct.
Voice Request (This feature requires a handset)
Using this feature, you can have a telephone conversation with the other party, on
the same call, after your fax message has been sent out. This is useful if you wish
to discuss the contents of the fax message with the other party.
You can save overall telephone line costs because you don’t have to redial the
other party to have the conversation.
Note: This feature cannot be used with Memory Transmission.
The following procedure tells you how to set up a Voice Request. However, refer
to "Talk After Sending a Fax" on page 80 for details on how to answer the phone
when it rings.
ECONOMY TX
TIME= 11 :00AM
YES
TO END
ROUTINE
OPERATION
ROUTINE OPERATION SENDING A FAX MESSAGE
67