Filter
Top Products
Switching the Command Information Line On/Off
This is similar to the TTI On/Off switching option for Group 3 Transmission (see
page 64).
The Command Information Line consists or the Receiver and Transmitter Terminal
IDs, the Date and Time, and the Page Number. Normally, this line is printed at the
top of each of the pages you transmit when they are received at the other end.
The top of the image will be overprinted if there is no margin at the top of the
transmitted page.
In some cases, you may wish the other party to receive an unmarked copy of your
original. In this case, you can switch the Command Information Line off.
Note: If you switch the Command Information Line off, make sure that Label In -
sertion is also off if you want the image received at the other end to be un -
marked.
To switch this feature on or off, do the following. (See page 10 if you need more
information about the User Parameter settings adjustment procedure).
1. Function 6 0 2 2 2 2 9 1
2. The settings for switch 00 are now
shown on the bottom line of the display.
3. Press ↓ until the settings for switch 01
are shown.
The setting you need to use is digit 5.
4. If you wish to change the setting, press 5 .
5. Finish: Yes Function
USER PARAMETER PRINT LIST
DEFAULT: 01000000
SWITCH00: 01000000
YES
TO END
Digit 5
0: This feature is Off.
1: This feature is On.
APPENDIX C. ISDN G4 OPTION TYPE 90
242