Filter
Top Products
User Function Keys
There are five Function keys (F1 to F5) on the operation panel.
You can program each of these keys with a feature that you wish to use
frequently. There are two ways to do this.
❐ Store a User Function Code in the User Function Key.
❐ Store a Function Program in the User Function Key.
User Function Codes
You can program each of the User Function Keys with one of the following
functions. In a new machine, the User Function Keys F1 to F4 have already been
programmed, as shown in the table below in boldface.
Code Function Code Function
01
Use the Direct Fax Number Entry
feature. [F1]
11
Print the TCR [F3]
02 Dial a group 12 Print a File List
03 Input a Personal Code [F4] 13 Switch Memory Storage Report On/Off
04 Use Economy Transmission [F2] 14 Switch Forwarding On/Off *
05 Switch TTI On or Off 15 Send Tonal Signals
06 Do a Confidential Transmission 16 Input a Subaddress (G4 mode only) **
07 Print a received confidential message* 17 Not used
08 Do a Transfer Request 18 Use Secure Transmission
09 Do a Polling Reception 19 Batch Transmission
10
Polling Transmission: Use Secured
Polling or Stored ID Override
20
Specified Image Area Setup
*: Memory Card or Hard Disk required
**: ISDN G4 Kit required
ADVANCED
FEATURES
ADVANCED FEATURES OTHER
163