Filter
Top Products
Two in One
This feature helps you conserve paper. If the size of the incoming page is half the
size of the paper in the cassette, the machine will print out two pages on one
sheet of paper.
In the example shown above, somebody is sending your machine two sheets of
half-letter sized paper and your machine is printing them out on one letter sized
sheet.
Note: ❐ The effectiveness of this feature depends on the sizes of paper
stocked in your machine’s cassettes.
❐ If your machine currently has two sizes of paper installed, the machine
will try to print the incoming message on the smaller size.
❐ If Two in One is switched on, you will not be able to print out more than
one copy of an incoming fax message using Multi-sort Document Re -
ception.
To switch this feature on, do the following. (See page 10 if you need more
information about the User Parameter settings adjustment procedure).
1. Function 6 0 2 2 2 2 9 1
2. The settings for switch 00 are now
shown on the bottom line of the display.
3. Press ↓ until the settings for switch 05
are shown.
The setting that you need to change is
digit 2.
4. If you wish to change the setting, press 2 .
5. Finish: Yes Function
Received Message
Page 1
Page 2
Printout
Page 1 Page 2
Half-letter size
Letter Size
USER PARAMETER PRINT LIST
DEFAULT: 01000000
SWITCH00: 01000000
YES
TO END
Digit 2
0: Two in One is disabled.
1: Two in One is enabled.
Half-letter size
ADVANCED
FEATURES
ADVANCED FEATURES RECEPTION
151