Filter
Top Products
5. Either:
❐ Enter another RTI or CSI: Go to step 3.
❐ Finish: No . Go to step 2.
6. Scroll through the stored RTIs/CSIs on the screen with ↓ .
❐ It is not possible to edit previously stored RTIs/CSIs; if you wish to do so,
you must delete the incorrect label and store a new one.
❐ To delete the displayed RTI/CSI: Clear
❐ When you have finished: No . Go to step 2.
NOTE: Messages from senders that have RTI/CSIs that match those that
were input using the above procedure will be printed using the first
(upper) paper cassette.
If there is no paper in the upper cassette, messages from the specified
senders will be stored in the memory (substitute reception).
If there is no paper in the lower cassette, messages from other
senders will be stored in the memory.
Switching Specified Cassette Selection On/Off
Before you use this feature, you have to switch it on using Function 81.
1. Function 6 0 2 2 2 2 8 1
2. Scroll through the list of features with ↑ and ↓ until SPECIFIED CAS-
SETTE SELECTION appears.
3. Change the on/off setting by pressing ← or → .
4. Finish: Yes Function
PSTN LINE TYPE SELECT
DP TT
YES
TO END
ADVANCED
FEATURES
ADVANCED FEATURES RECEPTION
143