Turning On the Power
25
1
Turning On the Power
This machine has two power switches.
❖
❖❖
❖ Operation switch (right side of the
control panel)
Press to activate the machine.
When the machine has finished
warming up, you can make copies.
❖
❖❖
❖ Main power switch (left side of the ma-
chine)
Turning off this switch will turn
off the main power indicator on
the right side of the control panel.
After this is done, machine power
is completely off.
When the fax unit (optional) is in-
stalled, fax files in memory may be
lost if you turn this switch off. Use
this switch only when necessary.
Note
❒ This machine automatically enters
Energy Saver mode or turns itself
off if you do not use it for a while.
See p.59 “Auto Off Timer”, “Ener-
gy Saver Timer”.
Turning On the Main Power
A
AA
A
Make sure that the power cord is
firmly plugged into the wall out-
let.
B
BB
B
Open the switch cover, and then
turn on the main power switch.
The main power indicator turns on.
Important
❒ Do not turn off the main power
switch immediately after turn-
ing it on. Doing so may result in
damage to the hard disk or
memory, leading to malfunc-
tion.
Turning On the Power
A
AA
A
Press the operation switch.
The On indicator turns on.
Note
❒ If the power does not turn on
when the operation switch is
pressed, check the main power
switch is on. If it is off, turn it on.
AFT045S
ZFLS020N
ThemisC1_AE_zentai_pre_FM.book Page 25 Thursday, July 28, 2005 2:13 PM