Ricoh 3232C All in One Printer User Manual


 
Settings You Can Change with User Tools
59
4
Timer Settings
Auto Off Timer
After a specified time has elapsed following job completion, the machine au-
tomatically turns off in order to conserve energy. This function is called Au-
to Off.
The machine status after the Auto Off operation is referred to as Sleep
mode. For the Auto Off Timer, specify the time to elapse before Auto Off.
Note
Default: 45 minute(s)
Enter a time interval from 1 to 240 minutes, using the number keys
Auto Off may not work when error messages appear.
Energy Saver Timer
Set the amount of time the machine waits before switching to lower-power
mode after copying has finished or the last operation is performed.
The time can be set from 1 to 240 minutes using the number keys
Note
Default: 15 minute(s)
Panel Off Timer
Set the amount of time the machine waits before switching the panel off after
copying has finished or the last operation is performed.
Note
The warm up time for making a copy from standby mode is 3 seconds for
Panel off Level 1 and 10 seconds for Panel off Level 2.
Default: 60 seconds
Enter a time interval from 10 to 999 seconds using the number keys
System Auto Reset Timer
The System Reset setting automatically switches the screen to that of the func-
tion set in Function Priority, when no operations are in progress, or when an
interrupted job is cleared. This setting determines the system reset interval.
See p.53 Function Priority.
Note
Default: On, 60 seconds
The time can be set from 10 to 999 seconds, using the number keys
ThemisC1_AE_zentai_pre_FM.book Page 59 Thursday, July 28, 2005 2:13 PM