Ricoh 3232C All in One Printer User Manual


 
Settings You Can Change with User Tools
57
4
Reference
p.124 Changing the Paper Size
Paper Type: Bypass tray
Sets the display so you can see what type of paper is loaded in the bypass tray.
The paper types you can set for the bypass tray are as follows:
No Display, Recycled Paper, Special Paper, Colour Paper, Letterhead, Pre-
printed Paper, Prepunched Paper, Bond Paper, Cardstock, Label Paper,
Thick Paper, OHP, Plain: Dup.Back, Thick: Dup.Back
Note
Default: No Display
Paper Type: Tray 14
Sets the display so you can see what type of paper is loaded in each paper
tray. The print function uses this information to automatically select the pa-
per tray.
The paper types you can set for trays are as follows:
The paper types you can set for trays 1 and 2 are as follows:
No Display, Recycled Paper, Special Paper, Colour Paper, Letter-
head, Preprinted Paper, Prepunched Paper, Bond Paper, Cardstock,
Label Paper, Thick Paper, OHP
The paper types you can set for trays 3 and 4 are as follows:
No Display, Recycled Paper, Special Paper, Colour Paper, Letter-
head, Preprinted Paper, Prepunched Paper, Bond Paper, Cardstock
Note
Default:
Paper Type: No Display
Copying Method in Duplex: 2 Sided Copy
Apply Auto Paper Select: Yes
When paper of the same type and size is loaded in two different paper
trays and you want to specify tray for 2 Sided Copy and tray for 1 Sided
Copy, specify the upper tray for 2 Sided Copy. If one of the trays is speci-
fied as the default in Paper Tray Priority, assign 2 Sided Copy to that tray.
A mark appears next to the paper tray if [No] is selected in Auto Paper
Select.
Limitation
[Auto Paper Select] can only be selected for the copier function if [No Display]
and [Recycled Paper] are selected. If [No] is selected, Auto Paper Select is not
valid for the tray.
ThemisC1_AE_zentai_pre_FM.book Page 57 Thursday, July 28, 2005 2:13 PM