Ricoh 3232C All in One Printer User Manual


 
Turning On the Power
27
1
Saving Energy
-
--
-Energy Saver Mode
If you do not use the machine for a
certain period after an operation, or
when you press the {
{{
{Energy Saver}
}}
}
key, the display disappears and the
machine goes into Energy Saver
mode. When you press the {
{{
{Energy
Saver}
}}
} key again, the machine returns
to the ready condition. The machine
uses less electricity in Energy Saver
mode.
Note
You can change the amount of time
the machine waits before switch-
ing to Energy Saver mode after
copying has finished or the last op-
eration is performed. See p.59 En-
ergy Saver Timer.
-
--
- Auto Off
The machine automatically turns it-
self off when the job is finished, after
a certain period of time has elapsed.
This function is called Auto Off.
Note
You can change the Auto Off time.
See p.59 Auto Off Timer.
The Auto Off Timer function will
not operate in the following cases:
When a warning message ap-
pears
When the service call message
appears
When paper is jammed
When the cover is open
When the
Add Toner
" message
appears
When toner is being replenished
When the User Tools/Counter
screen is displayed
When fixed warm-up is in progress
When the facsimile, printer or
other functions are active
When operations were suspend-
ed
during printing
When the handset is in use
When the On-hook dialing func-
tion
is in use
When a recipient is being regis-
tered in the address list or
group dial list
When the Data In indicator is on
or blinking
When the sample print or locked
print screen is displayed
ThemisC1_AE_zentai_pre_FM.book Page 27 Thursday, July 28, 2005 2:13 PM