Filter
Top Products
83
Chapter 5: Maintenance
5-7 When Moving the Unit
Procedures from Preparing to Move Through Reinstalling
To move the machine, you must completely drain all ink inside the machine and secure the print heads in place with
retainers to protect them. Attempting to move the machine without first doing this may result in damage to internal
components due to leaking ink or damage to the heads.
This operation requires eight unused SOL INK cleaning cartridges. Have these on hand before you start.
1. Drain the ink and wash the interior.
1
Press the [MENU] key.
Press the [ ] key several times to select [INK
CONTROL].
2
Press the [ ] key.
Press the [ ] key several times to select
[HEAD WASH].
Press the [ENTER] key.
3
Discard the discharged ink in the drain bottle.
Attach the drain bottle and press the [ENTER]
key.
Be sure to discard the discharged ink. For more informa-
tion about how to dispose of discharged ink, see "5-5
Disposing of Discharged Ink."
4
Follow the on-screen instructions to insert and
remove the cartridges.
Ink discharge and washing are performed over the course
of several minutes. When the process ends, the sub power
is switched off.
This procedure requires four unused cleaning cartridges.
5
Turn off the main power switch.
Be sure to use SOL INK cleaning cartridges. Use of any other type may result in breakdown.
Once the preparations for moving are complete, move the machine and fill it with ink with as little delay as possible. Allowing
the machine to stand without ink may damage the heads.
When moving the machine, keep it at a temperature between 5 to 40˚C (41 to 104˚F) and at relative humidity between 20 to 80%
(with no condensation). Failure to do so may result in breakdown.
Handle the machine with care when moving, keeping it level (not tilted at an angle) and preventing it from striking other objects.
Remove the ink cartridge indi-
cated by the flashing number.
Insert the cleaning cartridge indi-
cated by the flashing number.
Remove the cleaning cartridge
indicated by the flashing number.
MENU
INK CONTROL
INK CONTROL
HEAD WASH
EMPTY
DRAIN BOTTLE
REMOVE SOL CRT.