Filter
Top Products
94
Chapter 6: Menus and Keys
6-3 Description of Keys
Key
Top menu
—
—
—
—
—
—
—
Function
This switches on and off the sub power . When the power is
switched on, the POWER LED lights up.
This detects the presence and the width of the media, and
displays the printable width.
The SETUP LED flashes while detection of media width is
in progress. When setup finishes, the SETUP LED lights up
continuously.
Also press this key when removing the media.
Pressing this key when any of the various menu screens is
displayed returns you to the top screen. (When this is done,
media setup cannot be canceled.)
The [PAUSE] key pauses printing. The PAUSE LED lights
up while paused.
Pressing this key again cancels the paused state.
Holding down the [SETUP] key for about 1 second while
paused causes remaining data to be cleared and cancels the
media's setup state.
This sets the print-start location in the scan direction (the
direction of print-head carriage movement). For more in-
formation, refer to "4-3 Setting the Location Where Print-
ing Starts" and see "Specifying a location in the scan direc-
tion."
This is used to accept, execute, or save the item shown on
the display.
Holding down the [TEST PRINT] key for one second or
longer while the SETUP LED is lit performs a printing test.
This enters the [HEAD CLEANING] menu for cleaning the
print heads.
Cleaning can be performed while in any state.
[ALL], [A GROUP], [B GROUP], or [C GROUP]: Begins
cleaning of the print heads. Holding down for one second
carries out cleaning for all the heads.
After cleaning, carry out a printing test to make sure there
are no problems.
For detailed information, refer to "2-3 Printing" and see "Per-
forming a Printing Test," and refer to "5-1 Cleaning the Print
Heads."
Default value
—
—
—
—
—
—
—
Setting range
—
—
—
—
—
—
—