Filter
Top Products
Installing driver over the network
18
2. Using a network-connected machine
► Command-line Parameters
Following table shows commands that can be used in the command
window.
Following command-line are effective and operated when
command is used with /s or /S. But /h, /H or /? are exceptional
commands that can be operated solely.
Command- line Definition Description
/s or
/S
Starts silent installation. Installs machine drivers
without prompting any
UIs or user intervention.
/p”<port name>”
or
/P”<port name>”
Specifies printer port.
Network Port
will be
created by
use of
Standard
TCP/IP Port
monitor. For
local port,
this port
must exist on
system
before being
specified by
command.
Printer port name can
be specified as IP
address, hostname, USB
local port name or
IEEE1284 port name.
For example:
• /p”xxx.xxx.xxx.xxx”
in where,
“xxx.xxx.xxx.xxx”
means IP address for
network printer. /
p”USB001”, /
P”LPT1:”, /
p”hostname”
• When installing the
driver silently in
Korean, type in-
Setup.exe /s /
L"0x0012” or
Setup.exe /s /L"18” .
Command- line Definition Description