Filter
Top Products
Scan features
119
4. Special features
4
Enter the server port number, from 1 to 65535.
5
Check the box next to SMTP Requires Authentication to
require authentication.
6
Enter the SMTP server login name and password.
7
Press Apply.
• If the authentication method of SMTP server is POP3
before SMTP, put a check mark of SMTP Requires POP
Before SMTP Authentication.
• Enter the IP address and port number.
Scanning and sending an email
1
Place a single document face down on the document glass, or
load the documents face up into the ADF.
2
Select (Scan) > Scan to Email on the control panel.
Or select Scan > Send Email on the touch screen.
3
Enter the login name and password if you configured on
SyncThru™ Web Service.
4
Enter the sender’s and recipient’s email address.
• You can send an email to yourself by activating the Auto
Send To Self option in the Settings > Scan > Scan To E-
mail on SyncThru™ Web Service.
5
Enter an email subject and press OK.
6
Select the file format to scan, and press OK.
7
Enter the SMTP server login name and password.
8
The machine begins scanning and then sends the email.
40
Scanning to FTP/SMB server
Setting up an FTP/SMB server
1
Access the SyncThru™ Web Service (see "Using SyncThru™
Web Service" on page 133).
2
Select Address Book > Individual > Add.
3
Check the box next to Add FTP or Add SMB.