Filter
Top Products
Fax features
114
4. Special features
• Notify me when fax received: Set to show the popup
window to notify receiving a fax.
• Print received fax: After receiving the fax, set prints
information for the received fax.
4
Press OK.
29
Changing the receive modes
1
Press (Fax) > Menu > Fax Setup > OK > Receiving > OK
> Receive Mode > OK on the control panel.
Or select Setup > Machine Setup > Next > Default Setting >
Fax Default > Common > Receive Mode on the touch
screen.
• Fax: Answers an incoming fax call and immediately goes
into the fax reception mode.
• Tel: Receives a fax by pressing On Hook Dial and then Start.
• Ans/Fax: Is for when an answering machine attached to
your machine. Your machine answers an incoming call,
and the caller can leave a message on the answering
machine. If the fax machine senses a fax tone on the line,
the machine automatically switches to Fax mode to
receive the fax.
To use the Ans/Fax mode, attach an answering machine to
the EXT socket on the back of your machine.
• DRPD: you can receive a call using the Distinctive Ring
Pattern Detection (DRPD) feature. Distinctive Ring is a
telephone company service which enables an user to use a
single telephone line to answer several different
telephone numbers. For further details, see "Receiving
faxes using DRPD mode" on page 115.
This setting may not be available depending on your
country.
2
Press OK.
3
Press Stop/Clear to return to ready mode.
30
Receiving manually in Tel mode
You can receive a fax call by pressing On Hook Dial and then
pressing Start when you hear a fax tone.