Filter
Top Products
B
ASIC
F
UNCTIONS
2.4
Sending a Fax Automatically
1
Load the document(s) face down into the ADF.
For details about loading a document, see page 2.2.
2
Adjust the document resolution to suit your fax needs. See page 2.3.
If you need to change the darkness, see page 1.19.
3
Enter the remote fax phone number using the number keypad.
You can use the one-touch keypad or speed or group dial numbers. For
details about storing a number, see page 2.15.
4
Press Start Copy/Fax.
After the number is dialed, the machine begins sending the fax when
the remote fax machine is ready.
NOTE
: When you want to cancel the fax job, press
Stop/Clear
at any time
while sending the fax.
Sending a Fax Manually
1
Load the document(s) face down into the ADF.
For details about loading a document, see page 2.2.
2
Adjust the document resolution to suit your fax needs. See page 2.3.
If you need to change the darkness, see page 1.19.
3
Press On Hook Dial. You hear a dial tone.
4
Enter the remote fax machine’s fax number using the number keypad.
You can use the one-touch keypad or speed or group dial numbers. For
details about storing a number, see page 2.15.
5
When you hear a high-pitched fax signal from the remote fax machine,
press Start Copy/Fax.
NOTE
: When you want to cancel the fax job, press
Stop/Clear
at any time
while sending the fax.
Redialing the Last Number
To redial the last number you called:
Press Redial/Pause.
If a document is loaded in the ADF, the machine automatically begins to send.