Filter
Top Products
M
AINTENANCE
5.4
3
With a dry lint-free cloth, wipe away any dust and spilled toner from
the toner cartridge area and the toner cartridge cavity.
CAUTION
: To prevent damage to the toner cartridge, do not expose it to light
for more than a few minutes. Cover it with a piece of paper, if necessary. Do not
touch the black transfer roller inside the machines.
4
Reinsert the toner cartridge and close the cover.
5
Plug in the power cord and turn the machine on.
Cleaning the Scanning Glass
Keeping the scanning glass clean helps ensure the best possible copies. We
suggest that you clean the scanning glass at the start of each day and
during the day, as needed.
1
Slightly dampen a soft lint-free cloth or paper towel with water.
2
Open the control panel by gripping its top and pulling it.
3
Carefully wipe the scanning glass with a soft dry cloth.
If the glass is very dirty, first wipe it with a slightly dampened cloth,
and then with a dry cloth. Be very careful not to scratch the glass
surface.
4
Close the control panel firmly until it clicks into place.
C
AUTION
: When closing the ope control, strongly push the LCD projection part in
the center portion of ope control. If it is not fully closed, JAM is likely to occur.