Filter
Top Products
B
ASIC
F
UNCTIONS
2.13
2
Reduced/Enlarged Copying
Using the Reduce/Enlarge button, you can reduce or enlarge the size of
a copied image from 50 % to 200 %.
To select from the predefined copy sizes:
1
Press Reduce/Enlarge.
The default setting appears on the bottom line of the display.
2
Use Reduce/Enlarge or the scroll button (➛ or ❿) to find the size
setting you want.
3
Press Enter to save the selection.
To fine-tune the size of copies:
1
Press Reduce/Enlarge.
2
Press Reduce/Enlarge or the scroll button (➛ or ❿) until
“Custom:50-200 %” displays on the bottom line. Press Enter.
3
Press the scroll button (➛ or ❿) until the copy size you want appears
on the display.
Pressing and holding the buttons allows you to quickly increase and
decreases in increments of 5.
You can enter the value using the number keypad.
4
Press Enter to save the selection.
N
OTE
: When you make a reduced copy, black lines may appear at the bottom of
your copy.
Changing the Default Settings
Copy options, including darkness, original type, copy size and number of
copies, can be set to the most frequently used modes. When you copy a
document, the default settings are used unless they are changed by using
the corresponding buttons on the control panel.
To create your own default settings:
1
Press Menu on the control panel until “Copy Setup” appears on the top line of
the display.
The first menu item, “Default-Change,” appears on the bottom line.
2
Press Enter to access the menu item. The first setup option, “Darkness,”
appears on the bottom line.
3
Press the scroll button (➛ or ❿) to scroll through the setup options.
4
When the option you want to set appears, press Enter to access the option.
5
Change the setting using the scroll button (➛ or ❿) or enter the value using
the number keypad.
6
Press Enter to save the selection.
7
Repeat steps 3 through 6, as needed.
8
To return to Standby mode, press Stop/Clear.
NOTE
: While you set copy options, pressing
Stop/Clear
cancels the changed
settings and restores their default status.