Filter
Top Products
A
DDITIONAL
F
EATURES
4.5
4
Advanced Fax Setting Options
Option Description
Send Forward You can set the machine to always forward all of the outgoing
faxes to a specified destination, in addition to the fax numbers
you entered.
Select Off to turn this feature off.
Select On to turn this feature on. You can set the number of the
remote fax machine to which faxes are forwarded.
RCV Forward You can set your machine to forward incoming faxes to another
fax number during a specified period of time. When a fax arrives
at your machine, it is stored in memory. Then, the machine dials
the fax number that you have specified and sends the fax.
Select Off to turn this feature off.
Select On to turn this feature on. You can set the fax number to
which faxes are forwarded. Then, you can enter the starting time
and/or the ending time. The Print Local Copy option allows you
to set the machine to print the fax, if fax forwarding is completed
without any error.
Toll Save You can set your machine to store your faxes into the memory
and send them at the specified toll-saving time. For details about
Toll Save mode, see page 1.17.
Select Off to turn this feature off.
Select On to turn this feature on. You can set the starting time
and/or the ending time for Toll Save mode.
Junk Fax Setup Using the Junk Fax Barrier feature, the system will not accept
faxes sent from remote stations of which their numbers are
stored in the memory as junk fax numbers. This feature is useful
for blocking any unwanted faxes.
Select Off to turn the feature off. Anybody can send you a fax.
Select On to turn the feature on. You can set up to 10 fax
numbers as junk fax numbers using the Set option. This feature
recognize the last 6 digits of the fax number set as a remote fax
machine’s ID. After storing numbers, you do not receive any
faxes from the registered stations. To delete all the junk fax
numbers, use the All Delete option.
Secure Receive You can keep your received faxes from being accessed by
unauthorized people.
For further details about setting this mode, see page 4.2.
Prefix Dial No. You can set a prefix dial number of up to five digits. This number
dials before any automatic dial number is started. It is useful for
accessing the PABX exchange.