Filter
Top Products
T
ROUBLESHOOTING
6.2
Clearing Document Jams
When a document jams while it passes through the ADF (Automatic
Document Feeder), “[Document Jam]” appears on the display.
1
Remove the remaining documents from the ADF.
2
Pull the jammed document gently out of the ADF. Skip to step 5.
If there is any resistance and the document does not move when you
pull it, continue to the next step.
3
Open the control panel by gripping its top and pulling on it.
4
Pull the document gently out of the ADF and close the control panel.
5
Load the documents back into the ADF.
NOTE
: To prevent document jams, do not use thick, thin or mixed documents.
C
AUTION
: When closing the ope control, strongly push the LCD projection part in
the center portion of ope control. If it is not fully closed, JAM is likely to occur.