Filter
Top Products
Other Transmission Features
106
3
Limitation
❒ Parallel Memory Transmission is
not available with G4.
Note
❒ Standard Memory Transmission is
used instead of Parallel Memory
Transmission in the following cas-
es:
• When the line is busy and could
not be connected to
• With Send Later
• When you store a document for
Memory Transmission while
another communication is in
progress
• When you send just an Auto
Document
• With Duplex Original
• With Batch Original Documents
Transmission
❒ When the amount of remaining
memory drops below a certain lev-
el, the machine switches to ordi-
nary memory transmission and the
parallel memory transmission fea-
ture is disabled until more memo-
ry becomes available.
❒ If you press the {
{{
{Stop}
}}
} key, the
document jams, or memory be-
comes full during Parallel Memory
Transmission, the machine stops
transmitting and prints the Com-
munication Result Report (Memo-
ry Transmission). The file is
erased.
❒ You can switch the Parallel Memo-
ry Transmission function on or off
with User Parameters. See p.178
“User Parameters” (switch 07 bit
2).