Savin 5510L Printer User Manual


 
Box Settings
247
7
Registering/Editing Personal
Boxes
This section describes how to register
Personal Boxes.
You can store the following items:
SUB Code (required)
Up to 20 characters long and can be
composed of digits 0-9, "q", "p"
and spaces (the first character can-
not be a space).
Name (required)
Up to 20 characters long.
Password (optional)
Up to 20 characters long and can be
composed of digits 0-9, "q", "p"
and spaces (the first character can-
not be a space). By programming
the password, no one without the
password can print out the re-
ceived messages in the Personal
Box. It is recommended to pro-
gram the password if you receive
confidential messages.
Receiver (optional)
You can register one delivery des-
tination for each Personal Box.
Specify the Quick Dial key or
Speed Dial that the delivery desti-
nation is stored in.
Quick Dial key (optional)
If you assign this SUB Code to a
Quick Dial key, press this key to
enter the associated User Code
(Personal Box SUB Code) with a
single key press.
Note
When using the following func-
tions, you can use SUB codes regis-
tered in Personal Boxes in place of
User Codes.
Restricted Access
See p.25 Restricted Access,
<Basic Features>.
User Code Transmission
See p.10 User Code Transmis-
sion.
Printing the Journal
See p.50 Printing the Journal.
Searching By User Code of
TX/RX File Save
See p.59 Searching Memory for
Sent Faxes and p.62 Searching
Memory for Received Faxes.
The Fax Header is not printed on
delivered messages. See p.56 Pro-
gramming Own Name / Fax
Header, <Basic Features>.
If a message cannot be delivered, a
Communication Failure Report is
printed and the message is saved
as a Confidential Reception docu-
ment.
You can specify a Quick Dial key
or Speed Dial containing an e-mail
address as the receiver when the
NIC FAX Unit (Option for Type1)
is installed.
You can edit boxes in the same
way as registering them. However,
to change the SUB Code itself, you
must delete it then register a new
SUB Code.
Reference
p.246 Personal Boxes
A
AA
A
Press the {
{{
{User Tools}
}}
} key.