Filter
Top Products
Reception Features
116
4
Remote Transfer
This feature allows same make or oth-
er make fax machines without the
Transfer Request function to perform
transfer requests to this machine.
Preparation
In order for this machine to per-
form this function, you need to
register the Remote ID, and the
Transfer Result Report return ad-
dress in the Quick Dial key or
Speed Dial. See p.199 “Registering
ID Codes”, p.63 “Quick Dial”,
<Basic Features> and p.76 “Speed
Dial”, <Basic Features>.
Limitation
❒ The requesting party's fax machine
must be able to send out a push
signal.
❒ The Remote Transfer function only
works with the standard and op-
tional G3 line. The optional ISDN
Unit and NIC FAX Unit (Option
for Type1) are not supported.
Note
❒ You can select whether the ma-
chine accepts remote transfers or
not with User Parameters. See
p.178 “User Parameters” (switch
11 bit 0).
How to make a Remote Transfer Request
(push signal)
This procedure describes how to
make a Transfer Request to this ma-
chine from the requesting party's ma-
chine.
Note
❒ To cancel the operation in
progress, press the {
{{
{q
qq
q}
}}
} key twice.
A
AA
A
Set the original and select any
scan settings you require.
B
BB
B
Dial using On Hook Dial, or lift
the handset and dial.
C
CC
C
When the connected line is a dial
line, the machine switches over so
it can send a push signal.
D
DD
D
When you hear the reception
tone, press the {
{{
{q
qq
q}
}}
} key.
When the remote transfer is ac-
cepted, you will hear a confirma-
tion "peeee" tone.
Note
❒ If remote transfer is turned off
on the machine at the other end,
you will not hear a confirmation
tone and the tone mentioned in
step D will continue.
❒ If the Transfer Request is not ac-
cepted, for example if memory
is full or the Remote ID has been
wrongly entered 5 times, you
will hear five "pee-po" tones
and the line will be cut off.
E
EE
E
Enter the 4-digit Remote ID
stored in the Transfer Station,
then press the {
{{
{q
qq
q}
}}
} key.
When you enter the correct ID, you
will hear a "peeee" tone.
Note
❒ If you do not carry out steps E to
J within 30 seconds, the line
will be cut off.
❒ Enter the next tone within 5 sec-
onds. If you wait too long, you
will hear a "pee pee pee" tone
and you must start the whole
procedure again.