Filter
Top Products
Installation, Move and Disposal of the Machine
285
10
Moving the Machine
R
CAUTION:
• If you are moving the machine to a distant location such as another floor or
building, contact your service representative. Note that the moving service is
a paid service.
• If the distance to the new location is short, move the machine yourself, follow-
ing the precautions described below.
• Make sure that the memory level indicated on the display is 100% before
unplugging the power cord.
• Make sure to unplug the power cord from the electrical outlet by holding
the power plug.
• Make sure to close the ADF cover, ADF unit, and side cover.
• Make sure to move the machine carefully, keeping the machine horizontal
at all times. Shaking the machine or tilting it to a large degree may cause
the machine to malfunction.
• After changing the location of the machine, check the contents of the follow-
ing information registered to the machine. If any of the information is incor-
rect, register the correct information again.
• If the fax number is changed
Own Fax Number See p.55 “Own Name/Fax Header/Own Fax Number”,
<Basic Features>, p.189 “G3 Analog Line”, and p.202 “Transfer Report”.
• If the Own Name such as company name is changed
Fax Header See p.55 “Own Name/Fax Header/Own Fax Number”, <Basic
Features>.
Disposing of the Machine
Contact your service representative when you wish to dispose of the machine.
R
WARNING:
R
CAUTION:
• Unplug the power cord from the wall outlet before you move the machine.
While moving the machine, you should take care that the power cord will not
be damaged under the machine.
• Disposal can take place at our authorized dealer.
• For environmental reasons, do not dispose of the machine or expended
supply waste at household waste collection points. Disposal can take place
at an authorized dealer.