Filter
Top Products
Key Operator Settings
204
7
Network Settings
Use of these settings requires the NIC
FAX Unit (Option for Type1).
Adjust these settings to set up the In-
ternet Fax Feature (Option for Type1).
For details, see Chapter 1, "Network
Settings" in the NIC FAX Unit manu-
al.
IP-Fax Parameter Settings
Use of these settings requires the NIC
FAX Unit (Option for Type1).
Adjust these settings to set up the IP-
Fax Feature (Option for Type1).
For details, see Chapter 1, "IP-Fax Pa-
rameter Settings" in the NIC FAX
Unit manual.
System Parameter Transmission
This feature sends information about
the condition of your machine to your
nearest service representative. Follow
these steps when your service repre-
sentative requests you to.
Note
❒ This information is sent to the des-
tination registered in your ma-
chine by a service representative.
❒ This information is sent directly
from the machine's memory to
your service representative.
A
AA
A
Press the {
{{
{User Tools}
}}
} key.
B
BB
B
Enter the code for "Key Op.
Tools" with the number keys.
Then press the {
{{
{q
qq
q}
}}
} key.
The "Key Op. Tools" main menu
appears.
C
CC
C
Enter the code for "System Set-
tings" with the number keys.
D
DD
D
Enter the code for "System Param.
TX" with the number keys.
Note
❒ If "System Param. TX" is not dis-
played, press [↑
↑↑
↑Prev.] or [↓
↓↓
↓Next]
until it is.
E
EE
E
Press the {
{{
{Start}
}}
} key.
The fax number registered by a
service representative appears.
The standby screen is displayed
when the transmission is com-
plete.