Filter
Top Products
Copying
130
5
C
CC
C
Press 0
00
0 or 1
11
1 key to select the pa-
per size of the optional Bypass
Tray Unit.
Note
❒ You can enter the paper size by
pressing [Custom]. However,
this is possible only when [Cus-
tom] is displayed as the paper
size of the optional Bypass Tray
Unit (the size mark is located at
the "p" mark).
❒ You can specify the paper thick-
ness by pressing [Pap.Type].
Specifying the Paper Size
A Press [Custom].
B Press 0
00
0 or 1
11
1 key to select [Hor-
izontal] or Vertical, and enter
the value of the paper size.
Note
❒ Press the {
{{
{Clear}
}}
} key or
{
{{
{Stop}
}}
} key before entering
the value.
❒ You can enter the paper size
in the following range:
• Width: 100 to 297 mm (3.9
to 11.6 in.)
• Length: 148 to 432 mm (5.8
to 17.0 in.)
C Press [OK].
Specifying the Paper Type
A Press [Pap.Type].
B Press 0
00
0 or 1
11
1 key to select the
desired paper type.
Note
❒ Select [Thick] when making
copies on postcards.
C Press [OK].
D
DD
D
If you are making multiple cop-
ies, enter the number of copies
with the number keys.
E
EE
E
Press the {
{{
{Start}
}}
} key to start copy-
ing.
When copying is complete, the ma-
chine returns to standby mode.