Filter
Top Products
Accessing the User Tools (Copier/Document Server Features)
99
5
General Features
2
/
5
❖
❖❖
❖ Duplex Mode Priority
You can select the type of Duplex
function effective when the ma-
chine is turned on, reset, or modes
are cleared.
❖
❖❖
❖ Copy Orientation in Duplex Mode
You can set the copy orientation
when making two-sided copies.
❖
❖❖
❖ Original Orientation in Duplex Mode
You can set the original orientation
when making two-sided copies.
❖
❖❖
❖ Change Initial Mode
You can select the initial mode or
Program No. 10 as the mode effec-
tive when the machine is turned
on, reset, or modes are cleared.
❖
❖❖
❖ Max. Copy Quantity
The maximum copy quantity can
be set between 1 and 100.
❖
❖❖
❖ Tone: Original remains
The beeper (key tone) sounds
when you forgot to remove origi-
nals after copying.
Note
❒ If the "Panel Tone" of the User
Tools (System Settings) setting
is "OFF", the beeper does not
sound irrespective of the "Tone:
Original remains" setting.
⇒"Panel Tone" in the General
Settings Guide
❖
❖❖
❖ Job End Call
You can choose whether or not the
beeper sounds when copying is
complete.
Note
❒ If the "Panel Tone" of the User
Tools (System Settings) settings
is "ON", the machine beeps to
notify you that the machine did
not complete a job for reasons
such as copying was interrupt-
ed, the paper tray ran out of pa-
per or a paper jam occurred.
General Features
3
/
5
❖
❖❖
❖ Copy Function Key: F1-F5
You can register frequently used
functions in function keys F1 to F5.
General Features
4
/
5
❖
❖❖
❖ Document Server Storage Key: F1-F5
You can register frequently used
functions in function keys F1 to F5.
You can also change the registered
functions.
UranosC1-ENcopyA_F1_FM.book Page 99 Friday, July 26, 2002 5:01 PM