Filter
Top Products
Supplementary Informations
113
6
• Label paper (adhesive labels)
• OHP transparencies
• Envelopes
When an odd number of originals is set in the optional document feeder, the
back of the last page of copied paper is blank. During copying, the image is
shifted to allow for the binding margin.
• When an odd number of originals is set in the optional document feeder,
the back of the last page of copied paper is blank. During copying, the im-
age is shifted to allow for the binding margin.
❖
❖❖
❖ Combine
• You cannot use the bypass tray with this function.
• If the calculated ratio is under the minimum ratio, it is adjusted to within
the available range of ratios automatically. However, with some ratios,
parts of the image might not be copied.
• You cannot use custom size paper.
• In this mode, the machine selects the reproduction ratio automatically.
This reproduction ratio depends on the copy paper sizes and the number
of originals.
• The reproduction ratios you can specify are 25-400%.
• A separation line between originals can be printed with the User Tools. ⇒
p.103 “Separation Line in Combine”
• If the direction of originals is different from that of the copy paper, the ma-
chine will automatically rotate the image by 90° to make copies properly.
• If the number of originals placed is less than the number specified for com-
bining, the last page is left blank as shown in the illustration.
❖
❖❖
❖ Repeat
Depending on the paper size, ratio, and orientation of the paper, parts of re-
peated images may not be copied.
❖
❖❖
❖ Centering
Though the original is set to a different orientation than the paper, the ma-
chine will not rotate the image by 90° (Rotate copy).
❖
❖❖
❖ Margin Adjustment
If you set a binding margin that is too wide, part of the image may not be cop-
ied. When making copies in Combine mode, the binding margin is added to
the copies after the combination is finished.
UranosC1-ENcopyA_F1_FM.book Page 113 Friday, July 26, 2002 5:01 PM