Filter
Top Products
Copying
18
2
Auto Start
Copy starts automatically when the
machine is ready for copy.
A
AA
A
Set the copy contents while
“Please wait.” is displayed.
B
BB
B
Set the original.
C
CC
C
Press the {
{{
{Start}
}}
} key.
The {
{{
{Start}
}}
} key lamp will flash.
Interrupt Copy
Use this function if you wish to inter-
rupt a long copy job to make urgently
needed copies.
Limitation
❒ You cannot use the Interrupt Copy
function when scanning fax origi-
nals.
A
AA
A
Press the {
{{
{Interrupt}
}}
} key.
The Interrupt indicator goes on.
When the originals stop scanning
A Remove the originals that were
being copied and place the
originals you wish to copy.
B Press the {
{{
{Start}
}}
} key.
The machine starts making your
copies.
C When your copy job is fin-
ished, remove your originals
and copies.
D Press the {
{{
{Interrupt}
}}
} key again.
The Interrupt indicator goes off.
E When the display prompts
you, set the remaining origi-
nals again before interrupting.
F Press the {
{{
{Start}
}}
} key.
Note
❒ The interrupt copy job set-
tings will be restored and the
machine will continue copy-
ing from where it left off.
When the machine keeps
copying
A Place the originals you wish to
copy.
B Press the {
{{
{Start}
}}
} key.
The machine stops the previous
original job and starts copying
your original.
C When copying is complete, re-
move your originals and cop-
ies.
D Press the {
{{
{Interrupt}
}}
} key again.
The Interrupt indicator goes off.
The interrupt copy job settings
will be restored and the ma-
chine will continue copying
from where it left off.
Original Beeper
The beeper sounds and an error mes-
sage is displayed when you leave
your originals on the exposure glass
after copying.
Note
❒ ⇒ p.99 “Tone: Original remains”
UranosC1-ENcopyA_F1_FM.book Page 18 Friday, July 26, 2002 5:01 PM