Filter
Top Products
Color Functions
25
2
Color Functions
Selecting a Color Mode
Select a Color mode that best suits
your originals and copying require-
ments.
Reference
For color images ⇒ p.i “What You
Can Do With This Machine <Color
Functions/Color Adjustments>”
The following basic functions are ex-
plained in this section.
❖
❖❖
❖ Auto Color Select
Judges the color of the original au-
tomatically, and copies either in
full color or black/white.
❖
❖❖
❖ Full Color Copy
Copies by overlaying yellow, ma-
genta, cyan and black.
❖
❖❖
❖ Black/White Copy
Copies in black regardless of the
color of the original.
❖
❖❖
❖ Single Color Copy
Copies in one designated color.
Note
❒ Yellow, magenta and cyan will
be copied with one toner color,
but beige, orange, red, light
green, pink, green, marine blue,
blue and purple uses 2 toner
colors to copy.
❖
❖❖
❖ Two Color Copy
• Two Color Copy (Normal)
Copies black and other parts in
two specified colors.
Note
❒ You can select from basic
colors, registered colors.
• Two Color Copy (Red & black)
Copies the red part in red, and all
the other parts in black or white.
Note
❒ When the width of the color
is set to “Wider”, colors close
to orange and purple will be
recognized as red. This ad-
justment will be valid in
“Erasing Designated Colors”
and “Color Change”. ⇒
p.106 “Color Sensitivity”
A
AA
A
Select the type of color, then press
the key.
When the {
{{
{Single Color}
}}
} key is
selected
A
AA
A
Select designation method of
color ( [Basic Color], [User Color] ).
B
BB
B
Select the color, and then press
[OK].
Note
❒ When copied using the regis-
tered color, the original will be
copied lighter than the regis-
tered color.
❒
Press [
Lighter
] or [
Darker
], and you
can adjust the density in 4 steps.
UranosC1-ENcopyA_F1_FM.book Page 25 Friday, July 26, 2002 5:01 PM