Filter
Top Products
5
Control Panel
Note
❒ This illustration shows the Control Panel of the machine with options fully in-
stalled.
1.
Screen Contrast knob
Adjusts the brightness of the display pan-
el.
2.
{
{{
{User Tools/Counter}
}}
} key
• User Tools
Press to change the default settings
and conditions to meet your require-
ments.
• Counter
Press to check or print the Counter
value.
• Inquiry
Shows where to order expendable
supplies and where to call when a
malfunction occurs. You can also print
these details.
3.
Indicators
These indicators show the status of the
machine or indicate errors.
4.
{
{{
{Adjust/Program Color}
}}
} key
Use this key to adjust and register colors.
⇒ p.73 “Color Adjustment/Program”
Note
❒ When image quality is adjusted, the
lamp in the {
{{
{Adjust/Program Color}
}}
} key
is lit.
5.
Color Circle
Refer to this when adjusting colors. ⇒
p.73 “Color Adjustment”
6.
Display panel
Shows operation status, error messages,
and function menus.
7.
{
{{
{Check Modes}
}}
} key
Press to check the entered copy job set-
tings.
8. {
{{
{Program}
}}
} key
Press to select the program mode. ⇒ p.82
“Programs”
9.
{
{{
{Clear Modes}
}}
} key
Press to clear the previously entered copy
job settings.
10.
{
{{
{Energy Saver}
}}
} key
Press to switch to and from the Energy
Saver mode. ⇒ “General Settings Guide”
11.
{
{{
{Interrupt}
}}
} key
Press to interrupt a long copy job to make
copies. ⇒ p.18 “Interrupt Copy”
12.
Main power indicator
This indicator goes on when the main
power switch is turned on and goes off
when the switch is turned off.
UranosC1-ENcopyA_F1_FM.book Page 5 Friday, July 26, 2002 5:01 PM