Filter
Top Products
47 | CHAPTER 4 – REMOTELY MANAGING YOUR INTERACTIVE WHITEBOARD
SYSTEM
Additional VGA Source Controls
Your VGA source supports all the general source controls described on page 45, as
well as the commands listed in this section. These settings are unavailable when the
projector is off, or when the VGA sources are disconnected.
NOTE
Some of these commands are invalid with composite video sources.
VGA Source Information Commands
These commands inform you of the current VGA source settings.
VGA Source Control Commands
These commands control the appearance of your VGA source. These settings are
unavailable when the projector is off, or when the VGA source is disconnected. See
page 42 for setting absolute and adjustment commands.
Command Response
get frequency frequency=[current frequency setting]
get tracking tracking=[current tracking setting]
get saturation saturation=[current saturation setting]
get tint tint=[current tint setting]
get sharpness sharpness=[current sharpness setting]
Command Command Target Range Response
set frequency [value] =-5 to =5 frequency=[value]
set tracking [value] =0 to =63 tracking=[value]
set saturation [value] =0 to =100 saturation=[value]
set tint [value] =0 to =100 tint=[value]
set sharpness [value] =0 to =31 sharpness=[value]