Filter
Top Products
58 | CHAPTER 4 – REMOTELY MANAGING YOUR INTERACTIVE WHITEBOARD
SYSTEM
Lamp Reminder Select On to show or Off to hide the lamp
replacement reminder when it appears. This reminder
appears 100 hours before the recommended lamp
replacement.
Lamp Mode Adjusts lamp brightness to Standard or Economy.
Standard displays a high-quality, bright image.
Economy increases the lamp life by decreasing the
brightness of the image.
Auto Power Off Sets the length of the auto power off countdown timer
between 1 and 240 minutes. The timer begins to
count down when the projector no longer receives a
video signal. The timer finishes when the projector
enters Idle mode. Select 0 to turn off the timer.
Zoom Adjusts the zoom to the center of the image in or out
from 0 to 30.
H-position (RGB input) Moves the projected image’s horizontal position left or
right from 0 to 100.
V-position (RGB input) Moves the projected image’s vertical position up or
down from -5 to 5.
Aspect Ratio Adjusts the image output to Fill Screen, Match Input
or 16:9.
• Fill Screen produces an image that fills the entire
screen with stretching and scaling.
• Match Input matches the projector’s aspect ratio to
the input’s aspect ratio, with black bands appearing
along the top and bottom edge of the screen
horizontally, in letterbox format, or with black bands
appearing along the left and right edge of the
screen vertically, in pillarbox format.
• 16:9 changes the output to 16:10 by letterboxing
the image, which is recommended for use with
HDTV and DVDs enhanced for wide-screen
television.
NOTE
See Video Format Compatibility on page 34
for appearance descriptions in each mode.
Submenu Setting Description