Filter
Top Products
60 | CHAPTER 4 – REMOTELY MANAGING YOUR INTERACTIVE WHITEBOARD
SYSTEM
3D Settings
This menu allows you to enable or disable 3D image display and set the format.
Network Settings
This menu allows you to enable or disable Dynamic Host Control Protocol (DHCP)
and set the network related addresses and names.
Submenu Setting Description
3D On/Off Turns the 3D feature On or Off.
3D Invert Selects the 3D Invert setting (L-R or R-L).
• L-R displays visual data for the left eye first.
• R-L displays visual data for the right eye first.
3D Format Selects the 3D format (Interleaved or Under-over).
• Interleaved breaks down the image frame for each
eye, alternately displaying a line of visual
information from each frame.
• Under-over concurrently displays horizontally
stretched image frames for each eye, one above
the other.
Submenu Setting Description
DHCP Turns the network’s DHCP On or Off.
• On automatically assigns the DHCP server’s
IP address to the projector.
• Off enables you to assign an IP address manually.
IP Address Displays the projector’s IP address in values between
0.0.0.0 and 255.255.255.255.
Subnet Mask Displays the projector’s subnet work mask number in
values between 0.0.0.0 and 255.255.255.255.
Gateway Displays the projector’s default network gateway in
values between 0.0.0.0 and 255.255.255.255.
DNS Displays the projector’s primary domain name
number in values between 0.0.0.0 and
255.255.255.255.
Group Name Displays the projector’s workgroup name (maximum
12 characters).
Projector Name Displays the projector’s name (maximum 12
characters).