Filter
Top Products
49 | CHAPTER 4 – REMOTELY MANAGING YOUR INTERACTIVE WHITEBOARD
SYSTEM
Audio Output Controls
These commands control your projector’s audio output to your audio system
(not included). Audio output controls aren’t defined by the video source. These
settings are unavailable when the projector is off.
Audio Output Information Commands
These commands inform you of the current audio output settings.
Audio Output Control Commands
These commands control your audio output settings. See page 42 for setting absolute
and adjustment commands.
NOTE
Typically, CC1 displays American English subtitles, while CC2 displays other
regional languages, such as French or Spanish, depending on television channel
or media setup.
Command Response
get volume volume=[current volume setting]
get mute mute=[current mute setting]
get volumecontrol volumecontrol=[current volume control setting]
get cc cc=[current closed captioning language setting]
Command Command Target Range Response
set volume [value] =-20 to =20 volume=[value]
set mute [target] =on
=off
mute=[target]
set volumecontrol [target] =on
=off
volumecontrol=[target]
set cc [target] =cc1
=cc2
=off
cc=[target]